DS-2 Lady

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel

Reference: C049.210.33.026.00

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel - #2

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel - #4

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel - #6

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel - #5

DS-2 Lady

Women watch ∙ Quartz ∙ Champagne/Golden ∙ PVD coating ∙ 316L stainless steel

Reference: C049.210.33.026.00

CNY 3 650.-

Find a store

New

In 1968, the DS-2 established new benchmarks for resistance. Certina is currently reviving this spirit with watches that feature cutting-edge design, robustness and precision.

Technical specifications

DS Concept

1. Sapphire crystal (ultra resistant to scratches)
2. O-ring gasket on stem
3. Two o-ring gaskets in crown
4. Specific gasket on case back
5. Reinforced case back
6. 10 bar (100 m) water resistance

Watch info

Reference

C049.210.33.026.00

Warranty

2-year warranty

Weight net

70.00g

Case

Case material

PVD coating

PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Bezel material

PVD coating

316L stainless steel

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 10 bar (100 m)

This information about the water resistance states the specified overpressure and diving depth to which a watch can be subjected and still remain in working order. As a general rule, we do not recommend wearing watches that are water-resistant to less than 10 bar (100 m) when swimming or diving. All Certina timepieces can withstand a pressure of at least 10 bar (100 m) stand - some of our watches can even withstand considerably higher pressures!

Length

25.80mm

Width

27.80mm

Height

8.60mm

Between lugs

13.00mm

Dial

Color

Champagne/Golden

Material

Diamond(s)

It is rightfully considered to be the king of gemstones: Diamond is the hardest natural material in the world. Rough diamonds are polished for use in the watch and jewellery industry and assessed by means of the four "C" criteria: Cut: The cut refers to the individual shape of the diamond. The more meticulously and professionally the stone has been faceted, the more intensively it reflects the light. Certina uses brilliant-cut diamonds for the case and octagon-cut ones for the dial. Colour: At first glance, you would be forgiven for thinking that all diamonds are white. However, experts distinguish between fine nuances in shades - Certina only uses Top Wesselton diamonds. Clarity: Almost every diamond has minimal inclusions which can be detected by a professional through a magnifying glass but are usually invisible to the naked eye. Certina processes diamonds from the coveted VSI (very small inclusions) grade. Carat: The carat is the unit that defines the weight of a diamond. One carat is equal to 0.2 g. The diamonds used by Certina have different carat numbers depending on the model - they are noted for each watch in the sales manual. Certina only uses diamonds which fulfil the conditions of the Kimberley Process, an international system for certifying rough diamonds. It helps to prevent trade in smuggled diamonds - referred to as "blood diamonds" - which are used to finance wars.

Mother of pearl

MOP is the acronym for mother-of-pearl. This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Movement

Type

Quartz

Model

F04.412

Features

Quartz

PrecidriveTM

The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

ETA

Swiss Made

Bracelet

Material

Quick-release system

Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.

PVD coating

316L stainless steel

Buckle material

316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

Diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.