DS+ Kit Aqua & Sport

Men watch ∙ Automatic ∙ Black

Reference: C041.407.19.051.00

Men watch ∙ Automatic ∙ Black ∙ PVD coating ∙ 316L stainless steel - #3

DS+ Kit Aqua & Sport

Men watch ∙ Automatic ∙ Black

Reference: C041.407.19.051.00

Find a store

New

Technical specifications

DS Concept

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C041.407.19.051.00

Warranty

2-year warranty

Case

Bezel material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: Three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only: Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be coloured in any colour you choose too.

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 20 bar (200 m)

Diameter

42.90mm

Height

11.18mm

Between lugs

20.00mm

Dial

Color

Black

Material

Super-LumiNova

Movement

Type

Automatic

Model

POWERMATIC 80.611

Features

Automatic

80-hr power reserve

The power reserve provides you with information about how long a mechanical timepiece can run for without being wound. Most timepieces have a power reserve of around 38 to 42 hours. Certina's innovative Powermatic 80 automatic calibre offers a power reserve of up to 80 hours - almost double as long as comparable models.

Nivachron

An innovative new titanium-based alloy that is used for balance springs. This revolutionary material was developed in collaboration with the Swatch Group and is used in selected brands. Nivachron springs are highly resistant to magnetic fields, shock, ageing and temperature fluctuations, lending them extremely high mechanical precision and making them remarkably reliable in everyday use.

ETA

Swiss Made

Bracelet

Material

Quick-release system

Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.

316L stainless steel

Synthetic

Buckle material

316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

Features

Nivachron™ balance spring

The mechanical movement of this watch is equipped with a Nivachron™ balance spring. This innovative material was developed to increase resistance to magnetic fields. This important component makes a lasting contribution to the reliability, robustness and accuracy of the timepiece.

Nivachron™ balance spring