DS-X GMT

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel

Reference: C047.452.11.081.01

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel - #4

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel - #6

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel - #5

DS-X GMT

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel

Reference: C047.452.11.081.01

CNY 4 200.-

Find a store

New

Engineered for those who thrive in the wild, the DS-X GMT pairs technical mastery with unwavering strength. With the new DS Concept Extreme Shock Resistance and HeavyDrive™ technology, it’s as resilient as your adventurous spirit. From forest rain to rugged trails, this watch will be your trusted ally in every journey. Count on it, wherever your next step takes you.

Technical specifications

DS Concept

1. Sapphire crystal or domed sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back
4. Utra-thin seal dial support
5. Screwed movement holder

All Certina watches are equipped by at least one or more of these features.

Watch info

Reference

C047.452.11.081.01

Warranty

2-year warranty

Weight net

175.00g

Case

Case material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Bezel material

316L stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: Three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only: Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be coloured in any colour you choose too.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 20 bar (200 m)

Length

41.00mm

Width

41.20mm

Height

12.15mm

Between lugs

20.00mm

Dial

Color

Grey

Material

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Movement

Type

Quartz

Model

F06.865

Features

GMT - 2nd time zone

GMT watches also give wearers the opportunity to display another time zone, which can be set as they wish, in addition to the "main time". This information is usually provided by means of a separate hand on a 24-hour scale, making it possible to read the local time and home time at a glance when you are on the move, for instance.

Quartz

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

Time-zone mechanism

The time zone mechanism enables modern cosmopolitans to adjust the time on their watch to a new time zone in an instant - without losing even a single second: When the crown is pulled to the first position, the hour hand can be set in one hour increments on models with a time zone mechanism, without interrupting the minutes and seconds.

ETA

Swiss Made

Bracelet

Material

Quick-release system

Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.

316L stainless steel

Buckle material

316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

Features

Extreme Shock Resistance

The latest version of the DS Concept is the product of intensive research into the shock resistance of wristwatches. Cutting-edge equipment and extensive testing have been used to develop an ultra-robust design that raises the benchmark yet again. What’s the secret behind the success of the “New DS Concept Extreme Shock Resistance”? The tried-and-tested qualities of the classic DS Concept, combined with three extra features.

GMT

This model features a function to effortlessly set a second time zone – perfect for those who want to know the time on the other side of the globe. The 24-hour display can be operated independently of the standard minute and hour hand, and can be read easily at a glance.